Review: BigTone EDM Expansion Pack for Z3TA+ 2

by Craig Anderton

Sound Designer Nico Herz has done sound design for a variety of companies, of course including Cakewalk. BigTone EDM, for Z3TA+ 2, is (as you can probably guess from the name) designed for EDM. So if you’re into traditional bluegrass, you probably should not continue reading this.

Anyway, the presets are designed for the EDM “sweet spot” of 125bpm. There are 127 presets total, arranged as eight banks: 7 Bass, 19 Keys, 11 Leads, 20 Pads, 11 Sequences, 6 Sound FX, 19 Textures, and 34 Arps. I’m going to assign each bank a letter grade average for two reasons—it might be helpful, and because sounds are so subjective, if you end up disagreeing with me you’ll know not to bother reading any sound reviews I do. Conversely, if you think my evaluations are correct, we can have an ongoing relationship with future sound reviews. Continue reading Review: BigTone EDM Expansion Pack for Z3TA+ 2

Free Impulse Responses For Your Convolution Reverb

by Daniel Gonz
We’d like to release an impulse pack that we created last year in New York City. This free impulse response pack captures the simple ambience of two fantastic live rooms for drums, vocals, and pretty much any acoustic instrument you can imagine. Drop them into your choice of any convolution reverb to add depth to the elements of your mix.

Download the FREE Impulse Response pack here

Free Impulse Responses for Convolution Reverbs

The Dynamic Gate | A Cleaner Way To Mix Drums

by Daniel Gonz

Gates are wonderful processors that can clean up background noise and bleed in your audio tracks. They’re a bit tricky to understand because the key to successfully using one is often a specific feature that’s hidden or buried in the interface. The feature I’m referring to is called the sidechain. It’s a powerful element of my mixing workflow and I’d like to show you why.

To follow along with this post, you can download the audio examples here.

In its simplest form, a gate allows a signal to pass through it only when its decibel level is above a set threshold. This means the gate is ‘open’. If the signal falls below the threshold then no signal is allowed to pass. This means the gate is ‘closed’. The sidechain becomes an integral part of this entire process because it’s what the gate uses to detect whether or not the signal is above or below the set threshold.

Sonitus Gates On Kick and Snare in SONAR
Top Left to Bottom Right: Kick In Gate, Kick Out Gate, Snare Top Gate, Snare Bottom Gate

Continue reading The Dynamic Gate | A Cleaner Way To Mix Drums

CakeTV Live Ep 4 – Mixing Drums in SONAR Part 1

by Dan Gonzalez

In this episode, we’re diving into drum mixing, and doing little things at the beginning of the mix that will have a HUGE impact right away.

If you’re interested in more drum production, check out our FREE eBook about editing multitrack drums.

Designer’s Notes: Smart Swipe

by Lance Riley

Background

In a world where consoles are less likely to be seen or even touched by musicians today and a control surface is referred to as a mixer occasionally, I always find myself missing the tactility of working in an analog studio. Don’t get me wrong though, I truly love all the affordances that our modern digital production environments allow for, but yet here I am… I wanted to make the mouse act more like a finger touching controls when working in SONAR, so we started working with that idea and came up with many ways that mouse gestures could be improved upon to do more than currently possible.

Introducing Smart Swipe

Workflow is extremely important to us, and we wanted users to see this as an improvement to their existing workflows without disturbing the way they use the app. We started looking at track state management and how we could make the app feel more responsive. There was already a lot of affordance to controlling groups of tracks through Quick Groups, but some gestures at times seemed like Quick Groups just weren’t quick enough. For example, I work a lot with 2 guitar mics, and sometimes I just want to solo or mute both tracks without using a bus. It seemed very natural to want to click and drag from a control on one track and have it affect the same control on neighboring tracks.

The benefits of using Smart Swipe

With Smart Swipe, you can:

  • Quickly Mute or Solo multiple tracks that are in series like Guitars with 2 mics, recording Bass with a DI and a mic, etc
  • Alleviate some situations where you would need to put tracks into a folder.
  • Add additional control to tracks already in a folder.
  • Quickly check the phase relationship across drum mics while playing back.
  • Quickly A/B the processing of tracks by Smart Swiping the FX Bin Enables
  • Isolate and listen to takes by looping a section and Smart Swiping the Solo Exclusive buttons on the take lanes.
  • Quickly enable or disable multiple sends on the same track in the Console View

Track View vs. Console View

The Track View & Console View have some similar controls, but also several unique ones. Here are the areas in which you can currently use Smart Swipe.

  • Track View:
  • Track: Mute, Solo, Record, and Input Echo
  • Track: Read, Write, and Archive
  • Track: Take Lanes
  • Mute, Solo (exclusive), and Record (exclusive)
  • Track: Automation Lanes
  • Read, Write
  • Track: FX Bin Enable
  • Bus: Mute, Solo, and Waveform Preview
  • Bus: Automation Lanes
  • Read, Write
  • Bus: FX Bin Enable

Console View:

  • Track: Mute, Solo, Record, and Input Echo
  • Track: Read, Write, Interleave, and Phase
  • Track: FX Bin Enable
  • Track: Send Enable and Post (Vertically)
  • Track: ProChannel Enable and Post
  • Bus: Mute, Solo, Read, Write, and Interleave
  • Bus: FX Bin Enable
  • Bus: Send Enable and Post (Vertically)
  • Bus: ProChannel Enable and Post

Summary

We are very excited to have added Smart Swipe to SONAR and we hope our users find it useful and meaningful to their workflow. Now that I have been using Smart Swipe for a while I can’t imagine using a DAW that doesn’t have this available. We already have further enhancements planned and are thinking of even more ways that we can continue to improve Smart Swipe and the SONAR workflow.

Smart Swipe in SONAR’s 2016.06 Release

Smart Swipe

 
 
Here’s another workflow enhancement that becomes downright addictive once you start using it. With Smart Swipe Track Controls, you can quickly enable/disable buttons on multiple tracks by clicking a button in one track, then dragging across adjacent tracks without releasing the mouse button. Smart Swipe is also an extremely effective complement to Quick Grouping.

Smart Swipe works in the Track and Console Views with mouse gestures. The following controls support Smart Swipe:

  • Mute
  • Solo
  • Record
  • Input Echo
  • Send knobs within individual track strip (Console View only)
  • Phase (Console View only)
  • Interleave
  • Archive (Track View only)
  • Automation Read
  • Automation Write
  • FX Bin Enable
  • ProChannel Enable (Console View only)
  • ProChannel Pre/Post (Console View only)
  • Waveform Preview (Track View only)

CakeTV Live Episode 5: TH3 Cakewalk Edition

In this week’s edition of CakeTV Live, Joey and Dan tackle the brand new TH3 Cakewalk Edition. Check out all 6 parts here.

 

Cakewalk Talk Episode 3 Part 1 – Interview with Daniel Rowland from LANDR

Check out the latest episode of Cakewalk Talk, where Dan Gonzalez interviews audio engineer Daniel Rowland (Adrian Belew, StudioBelew, Accept) about LANDR and his role at the company.

 

We’ve posted a shorter cut below as well.

 

Sign up for LANDR and get 4 FREE WAV FILES. Download it Today

How To Create Easy Tempo Maps in SONAR with Melodyne 4

Thanks to Melodyne’s advanced tempo detection and SONAR’s powerful ARA drag-and-drop integration, your projects can now follow a live recording’s tempo. Simply drag a standard audio clip (or Melodyne region effect) to SONAR’s timeline, and SONAR creates a tempo map that follows the clip tempo. Watch the new video for more information.

Cakewalk Talk Episode 1: SONAR X3 vs SONAR Platinum – Adding Tracks

Introducing the new video series from Cakewalk, where you’ll find feature reviews, artist interviews, audio lessons, and lots and lots of musical “nerding out.” The first episode is available on YouTube now.

 

Try SONAR Free