Multi-Track Drum Editing – Identifying & Splitting Drum Hits

You need to start with a great performance

Before you begin to edit drum stems you have to make sure that you are working with tracks that were recorded close to a click. They need to be consistent. Tightening up the performance is something that is very invasive and requires a lot of time. If the drummer can’t put in the time to learn the parts then you should wait until they are ready to record their parts properly. Having this knowledge will make your life easier and should be something you think about during the preproduction stages of any record.

 

A note about the editing process.

The purpose of this type of editing is to identify the strong hits of the drum beat, split them into tiny parts, and then crop and align those small parts. The splits will depend on which part of the drum falls on each down beat.

In this tutorial Kicks happen every 1/4 note, snares every 2nd and 4th beat, and high hats on every 1/8th note. This happens for about 20 measures with various fills here and there and then it switches to a different pattern. We’ll move in measure by measure increments so that we don’t bite off more than we can chew at first.

Engage the metronome so that you can hear the pulse.  This will help you check your work as you edit. Download the project files here (if you didn’t download them from our previous post)  to get started:

Multi-Track Drum Editing Tutorial

Multi-track drum editing requires you to listen intently to the audio you’re editing. I recommend using headphones for this tutorial so that you can hear subtle edits. Erroneous edits are most exposed in the overheads, high hat, and cymbal frequencies so we’ll need to solo those as well as the kick and snare track while we work through this project.

As we work through the session the high hat and ride will need to be solo’d due to the spot mics that were placed on these. Everything else will follow suit with your editing.

You can also adjust your Track Height in the Track View by dragging the borders of the Continue reading Multi-Track Drum Editing – Identifying & Splitting Drum Hits

Multi-Track Drum Editing – DLC and Basic Tools

The need for perfect drum production is at an all time high.

In today’s world there is a huge need for all types of drum production. Everything from VST instruments to advanced drum replacement software has been growing in popularity. For the most part, records that require the tracking of live drums always have some sort of drum editing applied. This process is meticulous, long, and can be frustrating if you have never done this much in depth editing before.

Downloadable Content:

Let’s start by getting you the files you need to follow along with this tutorial.

Multi-Track Drum Editing Tutorial

Once downloaded, they should open just fine inside of SONAR X3.

Understanding the basics.

Before diving in, let’s take a look at some essential tools that we’ll be using for major drum editing. These tools may be basic to some, but are definitely the right functions we’ll need in SONAR to edit down these drums.

Creating selection groups

The first step in editing multi-track drums is making selection groups. Once created, these clips will be synced to one another for batch editing tasks – like multi-track editing. During the course of this tutorial we’ll be relying heavily on splitting clips – grouping will make this faster and more efficient.

To create these, choose CTRL+A within the Track View and then right-click on your clips. Near the bottom of the menu there will be an option that says Create Selection Group from selected clips. Select this and a number will appear in the header of your clips indicating that your clips are all in a group now.

As we work through the song the different Split edits will cause the group number to increase. This indicates that a new group has been made. You can change whether or not this occurs within the Preferences here:

 

Tab to Transients

Tabbing to transients locates strong transients and moves Continue reading Multi-Track Drum Editing – DLC and Basic Tools

6 Mindblowing reasons to get SONAR X3 Producer

1. SONAR has redefined mixing in the box.

The ProChannel redefines the way you work with the Console View. Each audio track, instrument track, and bus comes with a complete modular strip of analog effects. Even the inspector allows the users to preview a selected track’s ProChannel strip right from the Track View. With the click of a button users can expand this analog mixing console and fully customize it by dragging around the modules, or loading up a ProChannel presets. Load up the Compressors, Tube Saturation, Reverb, Console Emulators, Tap Emulators, and the new QuadCurve EQ Zoom with Analyzer by simply right-clicking. SONAR’s ProChannel lends itself to an immensely visual experienceand to enhance this feature a step further Cakewalk introduced the fly-out panel for the Quad Curve EQ (SONAR X3 Producer Exclusive). Adding this allows users to see and modify their audio signals in real-time across a spectrum analyzer.

2. The best pitch correction software that exists is fully integrated.

ARA technology is Celemony’s way of allowing DAW’s to host the functions of any audio edit capable plugin. ARA Integration means that Melodyne can now run as a fully integrated feature within SONAR X3. Yes, you read that correctly, SONAR X3 can now run the world’s best pitch correction as a native component and SONAR X3 Studio & Producer now include Melodyne Essential.

Melodyne interacts with the new Region FX clips in SONAR – allowing users to highlight any mono audio clip and apply Melodyne pitch correction. ARA’s high quality time stretching replaces the older time stretching capabilities run by AudioSnap and SONAR X3 has the ability to convert Audio to MIDI by simply dragging and dropping audio to a MIDI track. This deeply integrated technology makes SONAR perfect solution for complex pitch correction!

3. Floating windows get in the way, so SONAR solved that problem.

If you’re looking to purge your workflow of a cryptic DAW with an unsettling interface that is not conducive to a creative environment then you should really check out what SONAR’s been doing since the X-series overhaul. We’ve pretty much ended the floating window interface to bring users a more efficient musical experience. Our Smart Tools HUD can be accessed anywhere in the interface. Our main track view houses several different workflows that are a single click or shortcut away. Screen-sets lets you save window configurations and swap between them using your numerical keys. The list goes on and on and we’re continuing to make it better with more intuitive features.

4. It takes minutes to create something awesome.

There are programs that exist only to record and edit, and then there is SONAR – which is the major contender for the entire creative experience. Every part of SONAR’s MIDI and virtual instrument implementation allows users drag in, route, and start composing within seconds.

You can save your favorite instrument and track routing as track templates and load them into other projects without any hesitation. Complex routing tasks like a multi-track setup for Addictive Drums requires no thinking – just doing. Our synth rack stays separate from the Track View and Console view so that your processing plugins stay separate from your synthesis plugins. Organization, clarity, and not a second wasted, that’s why SONAR stays on top.

5. We don’t bundle useless plugins with SONAR.

In fact, we bundle some of the best software in the industry with SONAR. We’ve already covered the fact that Melodyne Essential comes with the product – but that doesn’t even scratch the surface. 

The Nomad Factory Blue Tubes bundle ships with SONAR X3 and contains as many dynamic, time-based, and eq-based plugins that you could ever need. We have astounding instruments from AAS: Strum Acoustic SONAR, and Lounge Lizard SONAR. Lastly, Addictive Drums – which will make you want to fire your drummer and spark your MIDI programming addiction. It doesn’t stop there, check out the full list of effects and get yourself on board with the future of the DAWs.

6. You’re not limited to a Track Count or Plugin Count.

There’s always that moment when you realize that your DAW has hit a brick wall with the amount of plugins or tracks that it can handle at once. SONAR doesn’t have that problem, in fact it goes above and beyond to give you the best 64-bit architecture, unlimited tracks, buses, and effects that money can buy. We even have surround sound support! No need to constantly submix your tracks or work in parts because you don’t have thousands of dollars to drop on a “pro-system”. Even at our $99 value we’ve taken out track and effects limitations and still retain flagship features like ARA and VST3.

Upgrade to SONAR X3 Producer today!

Still not convinced? Check out SONAR free for 30-days.

How Adventure Club is using SONAR X3 to stay on the EDM charts and ahead of the pack

There is an interesting movement happening in the music industry.  We have all seen it, and most are very opinionated about it…  The EDM Revolution.  Love it, like it, hate it – regardless, it’s here and thriving.  I recently had the good fortune to spend a few very interesting days with SONAR X3 users Adventure Club; one in LA, and one in NYC, and I can honestly say that I think these guys have figured out [some sort of] a new model of the “music industry.”

Truthfully speaking, I really was unsure about what our interaction would be.  I understand the EDM scene from afar and surely respect it, but I wasn’t sure what actually goes into the work behind the scenes of an EDM artist.  SONAR is used by Composers, Songwriters, and Producers of all genres, but when Cakewalk found out that Adventure Club, a heavyweight EDM act was using SONAR 8.5, we were pretty intrigued.  I had heard of the duo strictly from their online presence and charting activity, but I had never focused in on any of their productions.  Their popularity alone on social media told me there was something different and unique about this artist, and my assumptions were correct.

If you are not familiar with Adventure Club [“AC”] they are a Canadian Elecronic Dance Music duo, composed of Christian Srigley and Leighton James, and based out of Montreal, Quebec.  The duo formed while attending high school in Montreal as a hardcore pop-punk band, but later decided to move onto the more electronic sound of Electronic Dance Music (EDM) after simply getting bored with the pop-punk sound.  The first song to put the duo on the map was their remix of the song “Daisy” by the American alternative-rock band Brand New, which was put on The Hype Machine, an MP3 blog aggregator website.  After this track resonated deeply with EDM fans around the world, the duo was off to a solid start with a solid online fan base and foundation.  What separates this group from other EDM acts is that they both are accomplished musicians with a great knack for music production in general.  This translates into very solid tracks which they produce on their own in SONAR X3 Continue reading How Adventure Club is using SONAR X3 to stay on the EDM charts and ahead of the pack

Do you have too many song ideas? The Matrix View can help.

by Dan Gonzalez

Do you suffer from having too many musical ideas than you know what to do with? The Matrix View is great way to throw all of your riffs, licks, and leads into one place to mess around with song arrangements and structures.

How does it work?

The Matrix View operates under SONAR’s second audio engine. It’s the same audio engine that allows you to preview and play loops from the Media Browser. This non-linear playback engine is what is utilized during your performances in the Matrix View. All you really have to do to get started is drag audio from SONAR into the Matrix. It will populate a cell and then automatically route to the audio tracks you have set in the Track View. Click on the cell and then you can jump around the interface triggering different musical ideas. When you have multiple cells in one column you can trigger an entire column as well.

Try out the Martix View for free – Download the SONAR X3 Producer Free Trial

Where do I begin?

Grab some of your ideas – if they are loops then you have even more flexibility when changing tempos. If you want some great loops to work with then be sure to pick up these free loops that Craig Anderton supplied for us during Guitar Month. Continue reading Do you have too many song ideas? The Matrix View can help.

AD2: Pitch Envelopes and much more than just drum samples

by Dan Gonzalez

Yes, that’s right. You may think that Addictive Drums is just a simple sample player but it’s actually an impressive tool for sound design. XLN Audio has the program set so that you can only use the sounds they publish. BUT, the engine that processes these sounds is so powerful that you can virtually get any sound you could ever need from the drums they supply.

Next time you are in Addictive Drums check out the Edit section within this program and brace yourself. There are tons Continue reading AD2: Pitch Envelopes and much more than just drum samples

SONAR X3 Producer: Can You Ever Have Enough Virtual Instruments?

If you love virtual instruments then you’ll be happy with your upgrade to SONAR X3 Producer. We’ve got instruments for every use case, skill level, and genre of music. Who needs a band when you’ve got SONAR X3’s array of instruments at your disposal.

1. Addictive Drums

Hailing from the beautiful city of Stockholm – XLN Audio brings Cakewalk users a bountiful set of sounds inside of their flagship program Addictive Drums. The program consists of some of the best drum samples that you could possibly get that are completely optimized for both hardcore and first time users.

2. Dimension

A classic in the Cakewalk world. Dimension is a powerhouse sample based virtual instrument that can play extensive libraries consisting of drums, guitars, strings, etc. Continue reading SONAR X3 Producer: Can You Ever Have Enough Virtual Instruments?

A New Way To Learn Synthesis – Syntorial: Z3TA+ 2 Edition

Syntorial Z3TA+ 2

Syntorial: Z3TA+ 2 Edition – A New Way To Learn Synthesis
Syntorial is video game-like training software that will teach you how to program synth patches by ear. With almost 200 lessons, combining video demonstrations with interactive challenges, you’ll get hands on experience programming patches on a built-in soft synth and learn everything you need to know to start making your own sounds with ease.

Now comes with over 3 hours of Z3TA+ 2 video lessons!

Learn more and try it for free
 

Understanding Virtual Instrument Routing in SONAR

by Dan Gonzalez

Are you new to SONAR? Well then this article is for you!

SONAR acts a bit differently than some of it’s competitors – especially when it comes to inserting, routing, and using virtual instruments. Let’s take a look at the way these work inside of SONAR:

1. You can insert a virtual instrument in a few different places within SONAR

The first way is by selecting from the main menu along the top of SONAR: Insert > Soft Synth > (type of plugin) > (plugin)

Another useful way is to use the Synth Rack and click on the “+” button. This will expose a similar list.

Lastly, one of the quickest and easiest ways Continue reading Understanding Virtual Instrument Routing in SONAR

5 Awesome Virtual Instrument Tips in SONAR

With thousands of features, workflows, and settings,  even the most hardcore user can miss out on something awesome buried in SONAR. It happens to the best of us. So we’ve put together 5 quick and easy features that can improve your workflow as well as your creativity with Virtual Instruments and Synths. Check out the video here:

 

Try SONAR free for 30 days